New book by Larry Connors Click here Improve your trading - See how
The Chu Molybdenum Project description was submitted by the company on April 2, 2009 and received a Section 10 order from the BCEAO on May 1, 2009. The Section 10 Order is recognition by the British Columbia Government that the Chu Molybdenum Project is reviewable project under the Environmental Reviewable Projects Legislation and will require an environmental assessment certificate prior to obtaining mining permits.
The project description for the company's Chu Molybdenum Project outlines TTM's proposed open pit molybdenum mine at a production rate of 60,000 tonnes per day for annual production of 21 million tonnes over a projected 31 year mine life. At this projected mining rate the project would produce in excess of 600 million pounds of molybdenum and in excess of 450 million pounds of copper. The proposed project would also include 120 kilometers of electric power transmission lines, an electric powered mill facility consisting of crushing, grinding and conventional flotation concentration yielding a molybdenite concentrate.
The project description has now been accepted by the BC and Canadian Environmental Assessment Agencies and the newly formed Federal Major Projects Management Office. The three offices will now inform TTM which First Nations, local Communities, Provincial and Federal Agencies and other affected Stakeholders will form the Review Committee for the assessment.
"This is a very important step in our continuing efforts to develop the Chu Molybdenum Project into a productive, thirty year mine. We look forward to working with the Review Committee and particularly the Town of Vanderhoof and our First Nations Partners, to move towards that end." says Mr. Crichy Clarke President and CEO of TTM Resources Inc.
The project description can be viewed on the BCEAO website link
http://a100.gov.bc.ca/appsdata/epic/html/deploy/epic_project_list_report.html(numbersign)C
2009 Drill Highlights
TTM Resources Inc. is also pleased to release the results of four drill holes completed on the West Zone earlier this spring. Three of these holes, 2009-CHU-W024 to W026 were designed as infill holes to be used in future resource/reserve calculations with an emphasis on testing near surface, higher-grade zones. The fourth hole, 2009-CHU-W027 was drilled oblique to the strike of the deposit to test for high-grade mineralization associated with northeast trending fault zones. Hole W027 was collared 60 meters south of hole CHU-06-06, with a similar orientation.
-------------------------------------------------------------------------
Drill Hole Azimuth dip From (m) To (m) Width (m) Mo%
-------------------------------------------------------------------------
2009-CHU-W024 124.05 200.24 76.19 0.072
-------------------------------------------------------------------------
and including 133.19 172.81 39.62 0.093
-------------------------------------------------------------------------
2009-CHU-W024 454.70 462.36 7.66 0.135
-------------------------------------------------------------------------
-------------------------------------------------------------------------
2009-CHU-W025 84.43 108.40 23.97 0.073
-------------------------------------------------------------------------
2009-CHU-W025 171.98 200.28 28.30 0.099
-------------------------------------------------------------------------
-------------------------------------------------------------------------
2009-CHU-W026 17.37 418.00 400.63 0.042
-------------------------------------------------------------------------
including 230.00 273.39 43.39 0.086
-------------------------------------------------------------------------
and including 235.12 265.00 29.88 0.096
-------------------------------------------------------------------------
-------------------------------------------------------------------------
2009-CHU-W027 10.67 778.83 768.16 0.053
-------------------------------------------------------------------------
including 22.86 71.62 48.76 0.073
-------------------------------------------------------------------------
including 384.37 659.86 275.49 0.073
-------------------------------------------------------------------------
and including 559.28 659.86 100.58 0.102
-------------------------------------------------------------------------
* Full results are posted on the Company website
After spring break-up the Company intends to drill up to 3,000 meters in a 12 hole program, designed to continue testing near surface, high-grade mineralization at the West Zone. Some of these holes will in-fill gaps between reported sections, while the bulk of the drilling will test a thick quartz-feldspar-porphyry dyke that has yielded high-grade values at depth and has not been tested near surface. If the initial near surface testing of the dyke is successful, the program will be expanded to test downdip extensions. All 2009 drilling will be incorporated into a revised Resource/Reserve Report to be released later this year.
"We continue to expand our resource within the confines of the pit design laid out by our Engineers. Our focus to expand the near surface resource in the West Pit Area, continues to justify our early production plans. We continue to be impressed with our results at depth in the West Area." says Mr. Clarke.
Metallurgical Results
The company is pleased to report results from metallurgical testing conducted on drill core samples from its 100% owned Chu Molybdenum Project located 85 kilometers south of Vanderhoof B.C.
The emphasis of the testing was to maximize the recovery of molybdenite into a marketable concentrate while maximizing the rejection of pyrite and chalcopyrite. Test F20 recovered 75.8% Mo into a concentrate grading 51.5% Mo, thus achieving the desired goal of producing a molybdenum concentrate of greater than 50% from slightly lower than average grade material.
TTM has now prepared four additional composites from drill core assay rejects at an average grade of 0.06% Mo to reflect the average grade and to reflect the various lithologies within which the mineralization is contained. These composites have been sent to SGS Lakefield to examine the universality of the F20 test parameters and to investigate additional optimization parameters. In addition to the metallurgical testing these new composites will be subjected to acid generation potential (ABA) studies.
The technical content of this metallurgical summary has been prepared by Gary Hawthorne (P.Eng.), an independent qualified person as defined by NI 43-101.
The technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in National Instrument 43-101. The technical information provided in this press release was reviewed by Warren Robb, (P.Geo.) and Wesley Raven (P.Geo.), who are both qualified persons for the purposes of NI 43-101.
About TTM Resources Inc.
TTM Resources Inc. is a Vancouver, British Columbia based Molybdenum Development and Exploration Company focused on the resource development of the Chu Molybdenum Project and three other molybdenum properties in British Columbia, Canada.
For further information visit the Company's web site at www.ttmresources.ca
TTM RESOURCES INC.
"Crichy Clarke"
--------------------
W.K. Crichy Clarke
President & CEO
This communication to shareholders and the public contains certain forward-looking statements. Actual results may differ materially from those indicated by such statements. All statements, other than statements of historical fact, included herein, including, without limitations statements regarding future production, are forward looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.
SOURCE TTM Resources Inc.
More News:
Market Updates |
Stock Alerts |
All Trading News |
Stock Index
About TradingMarkets | Contact | Advertise | Careers | Link to Us | Site Map | Help | Terms & Conditions | Privacy Policy | Return Policy | Testimonials | Feedback
The Connors Group, Inc. ("Company") is not an investment advisory service, nor a registered investment advisor or broker-dealer and does not purport to tell or suggest which securities or currencies customers should buy or sell for themselves. The analysts and employees or affiliates of Company may hold positions in the stocks, currencies or industries discussed here. You understand and acknowledge that there is a very high degree of risk involved in trading securities and/or currencies. The Company, the authors, the publisher, and all affiliates of Company assume no responsibility or liability for your trading and investment results. Factual statements on the Company's website, or in its publications, are made as of the date stated and are subject to change without notice.
It should not be assumed that the methods, techniques, or indicators presented in these products will be profitable or that they will not result in losses. Past results of any individual trader or trading system published by Company are not indicative of future returns by that trader or system, and are not indicative of future returns which be realized by you. In addition, the indicators, strategies, columns, articles and all other features of Company's products (collectively, the "Information") are provided for informational and educational purposes only and should not be construed as investment advice. Examples presented on Company's website are for educational purposes only. Such set-ups are not solicitations of any order to buy or sell. Accordingly, you should not rely solely on the Information in making any investment. Rather, you should use the Information only as a starting point for doing additional independent research in order to allow you to form your own opinion regarding investments. You should always check with your licensed financial advisor and tax advisor to determine the suitability of any investment.
HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS HAVE CERTAIN INHERENT LIMITATIONS. UNLIKE AN ACTUAL PERFORMANCE RECORD, SIMULATED RESULTS DO NOT REPRESENT ACTUAL TRADING AND MAY NOT BE IMPACTED BY BROKERAGE AND OTHER SLIPPAGE FEES. ALSO, SINCE THE TRADES HAVE NOT ACTUALLY BEEN EXECUTED, THE RESULTS MAY HAVE UNDER- OR OVER-COMPENSATED FOR THE IMPACT, IF ANY, OF CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY. SIMULATED TRADING PROGRAMS IN GENERAL ARE ALSO SUBJECT TO THE FACT THAT THEY ARE DESIGNED WITH THE BENEFIT OF HINDSIGHT. NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT WILL OR IS LIKELY TO ACHIEVE PROFITS OR LOSSES SIMILAR TO THOSE SHOWN.
The Connors Group, Inc.
10 Exchange Place, Suite 1800
Jersey City, NJ 07302
© Copyright 2009 The Connors Group, Inc.