New book by Larry Connors Click here Improve your trading - See how
Since more than 60 years, Antonov ASTC is developing and commercializing aircrafts, known for their structural reliability and economic efficiency, easy maintenance and the ability to use unpaved airfields. Over 1.500 Antonov aircrafts have been exported to more than 70 countries. Beyond designing and building new aircrafts, Antonov ASTC is providing operational and engineering support as an extended service throughout the entire lifecycle of its aircrafts. Today, the company is seeking to drive its operational efficiency and the sustainability of its products to the next level.
"Dassault Systemes PLM solutions have long-since proven to be the best answer to the Aerospace industry challenges", stated Dmytro Kiva. "Our cooperation will be of mutual benefit, as we will continue to nurture each others' know how".
The project of employing Dassault Systemes solutions at Antonov ASTC started in 2002 with CATIA V5 and continued in 2007 with the implementation of ENOVIA in order to establish effective business processes. The major advantages of CATIA/ENOVIA software in Relational Design, Collaborative Design and Configuration Management were crucial for Antonov when choosing Dassault Systemes solutions.
The main focus of the companies' collaboration will now be the implementation of Dassault Systemes latest PLM portfolio to optimize Antonov aircraft conception processes. This aims to provide Antonov' experts full access to the high-end aeronautical technologies.
"Our collaboration with Antonov is undoubtedly beneficial for both parts", comments Laurent Valroff, Director of Dassault Systemes in Russia and CIS. "It is a special honour for us to provide this major aeronautical complex with our technical know-how. We are sure that our solutions will enable the company to make a considerable breakthrough in the design and construction of aircrafts".
About Antonov ASTC
ANTONOV Aeronautical Scientific/Technical Complex was founded in 1946 by Oleg Antonov, the eminent aircraft designer. Since then, more than one hundred types and modifications of aircraft of various classes and purposes have been designed, including: AN-2, AN-32, AN-38, AN-74, multipurpose aircrafts, transport AN-8, AN-12, AN-22 Anteis, AN-26, AN-70, AN-3T, heavyload AN-124 and AN-124-100 Ruslan, AN-225 Mriya, AN-10, AN-14, AN-24, AN-140, AN-148 passenger aircrafts.
Nowadays the Antonov Complex is engaged in It also provides services such as basic and conversion training for flight and maintenance crews and international air charter transportation, particularly of outsized cargoes. On-site training of local personnel is available to ensure their mastery of their chosen aircraft. Antonov also participates in international cooperation in the field of aircraft and equipment design and manufacture as well as the development of land transit vehicles.
Antonov ASTC and Dassault Systemes cooperation started in 2002 when the companies carried out a mutual pilot project devoted to the research of medium aircraft's units design based on CATIA V5R8. Since then, intensive work has been done to create a brand-new design system of "AN" aircrafts based on the systematic implementation of PLM solutions.
About Dassault Systemes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systemes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systemes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systemes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systemes' shares are listed on Euronext Paris (#13065, DSY.PA) and Dassault Systemes' ADRs may be traded on the US Over-The-Counter (OTC) market (DASTY). For more information, visit http://www.3ds.com.
CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks and 3D VIA are registered trademarks of Dassault Systemes or its subsidiaries in the US and/or other countries.
SOURCE: Dassault Systemes
Dassault Systemes Press Contacts Derek Lane (DS Americas) derek.lane@3ds.com +1 (818) 673-2243 or CJ Lin (DS AP) cj.lin@3ds.com +86 21 3856 8039 or Arnaud Malherbe (DS EMEA) arnaud.malherbe@3ds.com +33 (1) 61 62 87 73 or Antonov ASTC Press Contact Mrs. Oksana Trofimchuk kiva@antonov.com +38 (044) 454 33 48 +38 (044) 400 60 75 Fax. +38 (044) 400 70 98
More News:
Market Updates |
Stock Alerts |
All Trading News |
Stock Index
About TradingMarkets | Contact | Advertise | Careers | Link to Us | Site Map | Help | Terms & Conditions | Privacy Policy | Return Policy | Testimonials | Feedback
The Connors Group, Inc. ("Company") is not an investment advisory service, nor a registered investment advisor or broker-dealer and does not purport to tell or suggest which securities or currencies customers should buy or sell for themselves. The analysts and employees or affiliates of Company may hold positions in the stocks, currencies or industries discussed here. You understand and acknowledge that there is a very high degree of risk involved in trading securities and/or currencies. The Company, the authors, the publisher, and all affiliates of Company assume no responsibility or liability for your trading and investment results. Factual statements on the Company's website, or in its publications, are made as of the date stated and are subject to change without notice.
It should not be assumed that the methods, techniques, or indicators presented in these products will be profitable or that they will not result in losses. Past results of any individual trader or trading system published by Company are not indicative of future returns by that trader or system, and are not indicative of future returns which be realized by you. In addition, the indicators, strategies, columns, articles and all other features of Company's products (collectively, the "Information") are provided for informational and educational purposes only and should not be construed as investment advice. Examples presented on Company's website are for educational purposes only. Such set-ups are not solicitations of any order to buy or sell. Accordingly, you should not rely solely on the Information in making any investment. Rather, you should use the Information only as a starting point for doing additional independent research in order to allow you to form your own opinion regarding investments. You should always check with your licensed financial advisor and tax advisor to determine the suitability of any investment.
HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS HAVE CERTAIN INHERENT LIMITATIONS. UNLIKE AN ACTUAL PERFORMANCE RECORD, SIMULATED RESULTS DO NOT REPRESENT ACTUAL TRADING AND MAY NOT BE IMPACTED BY BROKERAGE AND OTHER SLIPPAGE FEES. ALSO, SINCE THE TRADES HAVE NOT ACTUALLY BEEN EXECUTED, THE RESULTS MAY HAVE UNDER- OR OVER-COMPENSATED FOR THE IMPACT, IF ANY, OF CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY. SIMULATED TRADING PROGRAMS IN GENERAL ARE ALSO SUBJECT TO THE FACT THAT THEY ARE DESIGNED WITH THE BENEFIT OF HINDSIGHT. NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT WILL OR IS LIKELY TO ACHIEVE PROFITS OR LOSSES SIMILAR TO THOSE SHOWN.
The Connors Group, Inc.
10 Exchange Place, Suite 1800
Jersey City, NJ 07302
© Copyright 2009 The Connors Group, Inc.
